錯誤代碼0x80070035通常由網絡配置或共享設置問題導致，可通過以下步驟解決：1.確保兩臺電腦連接在同一網絡并屬于同一工作組；2.啟用文件和打印機共享及網絡發現，并關閉密碼保護共享；3.檢查SMB版本兼容性，必要時啟用SMBv1；4.使用IP地址測試主機名解析及連通性；5.調整高級設置如啟動Server服務、禁用第三方防火墻或啟用不安全來賓登錄。這些操作可逐一排查并修復常見問題。

You're trying to access a shared folder or printer on another computer in your network and get error code 0x80070035 – The network path was not found. It’s a common issue, especially when using file sharing between Windows computers. The good news is that most of the time, it’s something you can fix without too much hassle.

Here are some practical steps that usually resolve this issue:

Make Sure Both PCs Are on the Same Network

This might sound obvious, but double-check both computers are connected to the same local network — either via Wi-Fi or Ethernet.

• If one is on a different Wi-Fi network (like at home vs. a coffee shop), they won’t see each other.
• If you’re using a wired connection, make sure there's no firewall or router blocking internal communication.

Also, verify that both machines are part of the same workgroup:

1. Press Win R, type sysdm.cpl, and hit Enter.
2. Under the "Computer Name" tab, check the workgroup name — it should be the same across all devices (usually WORKGROUP by default).

Enable File and Printer Sharing

Windows has built-in settings for allowing network discovery and file sharing. If these are turned off, you won’t be able to reach shared resources.

To enable them:

1. Go to Control Panel > Network and Internet > Network and Sharing Center.
2. Click Change advanced sharing settings.
3. Under the current network profile (Private or Guest), turn on:
   • Network discovery
   • File and printer sharing
4. Save changes.

Also, disable password-protected sharing if you're not using user accounts to access the shared resource. This is under the same menu.

Check SMB Version Compatibility

If you're connecting between newer and older Windows versions (e.g., Windows 11 to Windows 7 or Server 2008), it might be an issue with the SMB protocol version.

SMBv1 is disabled by default in newer Windows builds, which can cause connectivity issues with older systems.

To enable SMBv1 (only if needed):

1. Open Control Panel > Programs > Turn Windows features on or off.
2. Tick SMB 1.0/CIFS File Sharing Support.
3. Restart if prompted.

Alternatively, ensure both machines support SMBv2 or higher and that it’s enabled.

Verify Hostname and IP Accessibility

Sometimes, the system can't find the target machine because of name resolution issues.

Try accessing the shared folder using its IP address instead of hostname. For example:

\\192.168.1.100\SharedFolder

To find the IP address of the target machine:

1. On that machine, open Command Prompt.
2. Type ipconfig and look for IPv4 Address.

Also, test connectivity by pinging the target:

ping 192.168.1.100

If it doesn't respond, there may be a deeper network or firewall issue.

Tweak Advanced Settings (Optional)

If the above didn’t help, here are a few more things to try:

• Ensure the Server service is running:
  Press Win R, type services.msc, scroll to "Server", and set startup type to Automatic, then restart it.
• Disable any third-party firewalls temporarily to rule them out.
• Use the Group Policy Editor (gpedit.msc) to allow insecure guest logons:

  Computer Configuration > Administrative Templates > Network > Lanman Workstation > Enable Insecure Guest Logons = Enabled

  ---

  That’s about it. Most of the time, the problem comes down to mismatched network settings or incompatible protocols. Fixing the basics like workgroup alignment, file sharing options, and SMB compatibility usually clears up the 0x80070035 error. Not too complicated, but easy to overlook a small detail.

  以上是如何修復錯誤代碼0x80070035 Windows上找不到網絡路徑的詳細內容。更多信息請關注PHP中文網其他相關文章！