錯誤“0x80070035：網絡路徑未找到”通常由網絡配置問題導致，可通過以下步驟解決。 1. 確保啟用了網絡發現和文件共享，並確認設備連接在同一網絡；2. 檢查目標設備是否開機並正確共享資源，嘗試通過IP或主機名ping測試連通性；3. 暫時關閉防火牆或殺毒軟件，確認其未阻止文件共享，並在Windows防火牆中允許相關通信；4. 若設備依賴舊版協議，啟用SMB 1.0/CIFS支持；5. 直接使用IP地址或主機名訪問共享資源，繞過網絡瀏覽問題。多數情況下，通過這些調整即可恢復網絡訪問。

If you've ever tried to access a shared folder or printer on your network and got the error "0x80070035: The network path was not found," you're not alone. This issue usually pops up when Windows can't locate a device or file share on the network, and it's more common than you'd think. While the message sounds serious, it's often due to small misconfigurations or overlooked settings rather than a major system failure.

Let's break down what typically causes this and how to fix it step by step.

1. Check Network Discovery and File Sharing Settings

One of the most common culprits behind error 0x80070035 is that network discovery or file sharing has been turned off. Without these enabled, your PC won't be able to see other devices or be seen by them.

• Go to Control Panel > Network and Internet > Network and Sharing Center
• Click Change advanced sharing settings
• Under the current network profile (usually Private or Guest/Public), make sure:
  • Network discovery is turned on
  • File and printer sharing is enabled
  • Password protected sharing is set appropriately (if you're using accounts with passwords, leave this on)

After making changes, try accessing the shared resource again.

Also, double-check that both devices are on the same network — especially if one is connected via Wi-Fi and the other through Ethernet, or if there's a guest network in play.

2. Verify That the Target Device Is Accessible

Sometimes the problem isn't with your own computer but with the one you're trying to reach.

Here's what to check:

• Make sure the remote PC or device is turned on and connected to the same network.
• Ensure the shared folder or printer is actually shared and available.
• Try pinging the target machine by its IP address or hostname:
  • Open Command Prompt
  • Type ping [IP address] or ping [computer name]
  • If it doesn't respond, there may be a connectivity or firewall issue

If the ping fails, move on to checking firewall settings or router-level restrictions.

3. Adjust Firewall or Antivirus Rules

Your firewall or third-party antivirus might be blocking the necessary communication ports for file sharing.

Try this:

• Temporarily disable your antivirus/firewall (only for testing purposes)
• Then attempt to access the shared folder or printer again

If that resolves the issue, you'll need to create an exception in your security software for File and Printer Sharing , or switch back to Windows Defender if needed.

Also, within Windows Firewall:

• Go to Control Panel > Windows Defender Firewall > Allow an app through firewall
• Make sure File and Printer Sharing is checked for both private and public networks

4. Enable SMB 1.0/CIFS Support (If Necessary)

Older systems or certain NAS devices might still rely on the SMB 1.0 protocol, which Windows disables by default for security reasons.

To enable it:

• Go to Control Panel > Programs > Turn Windows features on or off
• Check the box next to SMB 1.0/CIFS File Sharing Support
• Click OK and restart if prompted

Only enable this if you know the device requires it — otherwise, it's best left off for better security.

5. Use Hostnames or IP Addresses Directly

Instead of browsing through Network in File Explorer, try typing the exact path into the address bar:

• \\[ComputerName]
• Or \\[IP Address]

For example:

• \\DESKTOP-ABC123
• Or \\192.168.1.100

This bypasses some of the discovery issues and connects directly to the device.

You can also map a network drive using this method to avoid future errors.

In short, error 0x80070035 usually comes down to network visibility, permissions, or outdated protocols. Start with basic checks like network sharing settings and device availability before diving into deeper fixes. Most of the time, a few quick adjustments will get you back on track without needing advanced troubleshooting.

基本上就這些。

以上是如何解決錯誤0x80070035找不到網絡路徑的詳細內容。更多資訊請關注PHP中文網其他相關文章！