要從系統鏡像恢復Windows，請先準備好外部系統鏡像、恢復驅動或安裝U盤，接著通過U盤啟動並進入“系統鏡像恢復”，然後選擇正確的鏡像進行還原。 1. 準備好可用的系統鏡像和啟動介質；2. 通過U盤進入Windows恢復環境；3. 選擇系統鏡像所在位置；4. 挑選合適的鏡像版本；5. 決定是否重新分區和格式化磁盤；6. 開始恢復並重啟電腦。注意：此過程會清除當前系統驅動器上的所有新數據，且恢復後可能需要重新安裝驅動程序和更新系統。

Restoring Windows from a system image is one of the most reliable ways to get your computer back to a working state after a major crash or failure. It's not something you do every day, but when you need it, it can be a lifesaver. Here's how to do it without getting stuck in technical jargon.

What You Need Before Starting

Before diving into the restore process, make sure you have:

• A complete system image backed up somewhere accessible (external drive, network location, etc.)
• A Windows installation USB or recovery drive — this is required if you can't boot into Windows normally
• Basic knowledge of where your system image is stored and which version you want to restore

If you don't already have a system image, you won't be able to proceed. Windows has a built-in tool called “Windows Backup and Restore” that lets you create these images, but once disaster strikes, it's too late to start making one.

How to Access System Image Recovery

You'll need to start your PC from a recovery environment. This can be done either through a recovery drive or a Windows installation USB.

1. Insert your recovery media and restart your computer.
2. Press whatever key your PC uses to open the boot menu (usually F12, Esc, or Delete).
3. Choose to boot from the USB device.
4. When the Windows setup screen appears, click Next , then click Repair your computer at the bottom-left corner.
5. Go to Troubleshoot > Advanced Options > System Image Recovery .

This will launch the system image restore wizard, which guides you through the actual restoration process.

Choosing and Restoring the Right Image

Once you're in the system image recovery tool, the next steps are straightforward — but important to get right.

First, the wizard will ask where your system image is located. If you've connected an external drive, it should show up here. If not, check cables or try another port.

Then you'll see a list of available images. Each one includes a date and time stamp. Pick the most recent one before things went wrong — unless you know a specific point you want to go back to.

The wizard will also let you choose whether to format and repartition disks as part of the restore. This option is useful if your drive is failing or you're moving to a new hard drive.

Important: Restoring a system image wipes everything on your current system drive. Any files created or changed after the image was made will be lost.

What Happens After the Restore

Once the restore completes, your PC will reboot — and assuming everything went smoothly, it should look just like it did when the image was created. All your apps, settings, and personal files (as long as they were included in the backup) will be there.

But keep in mind:

• Drivers might need reinstallation if you restored to different hardware
• Windows updates installed after the image will be gone
• Any files saved after the image was made won't be recoverable unless you had a separate data backup

It's a good idea to test your system image occasionally by restoring it to a spare machine or virtual environment, just to make sure it actually works when you need it.

基本上就這些。

以上是如何從系統圖像還原窗口的詳細內容。更多資訊請關注PHP中文網其他相關文章！