Building a bridge in RoadCraft may seem straightforward, but it can quickly become challenging if you overlook a small detail like a gap that causes your truck to float in a river.

If you're new to this feature or need a refresher, here's a detailed guide on how to construct a bridge correctly in RoadCraft... and avoid the hassle of multiple attempts.

Read More: Tips and Tricks | RoadCraft Guide*

Access the Bridge Menu

Begin by accessing your map screen.

Then, navigate to the Bridges tab using R1 (or RB).

If the tab appears empty, it means the bridge-building option is not yet available for your current level or objective.

When it's unlocked, you'll see all potential bridge construction points highlighted on the map.

Choose Your Bridge Location

Select the desired bridge location.

You'll be prompted to choose a starting point for the bridge.

This can be tricky... the point you select might not align perfectly with the bridge's actual start.

If the placement seems off or incorrect, use Circle or B to cancel and retry.

It's better to adjust now than to deal with a faulty road later.

Extend the Bridge to the End Point

After setting the starting point correctly, click and drag to establish the endpoint.

Ensure both ends slightly overlap the terrain.

Leaving any space between the land and the bridge can hinder AI convoys, trailers, and even yourself from crossing.

Even the smallest gap can be problematic.

Finalize or Redo the Bridge

If the placement looks good, confirm it.

However, if you need to make changes later, hold Square or X on the bridge to delete it entirely.

Then, return to the menu and try again.

This process won't cost you any resources.

Supply the Construction Materials

Once the bridge is positioned, you'll see the required materials for its construction.

Drive to either end of the bridge and unload the necessary materials in the designated construction zones.

That's all you need to do. Once the materials are delivered, the bridge will automatically construct itself.

You can then use it to cross... or send a convoy over, hoping they steer clear of any lakes.

Final Notes & FAQ

Constructing a bridge in RoadCraft involves a mix of building, estimating, and hoping the terrain isn't secretly against you.

Always verify the placement before transporting materials... it will spare you future frustrations.

FAQ

Q: How do I open the bridge-building menu in RoadCraft?

Access the map and use R1 or RB to navigate to the Bridges tab.

Q: Why am I unable to build a bridge in my current level?

The bridge-building feature might not be available yet in your current map or objective.

Q: What should I do if I place the bridge incorrectly?

Hold Square (or X) to remove it, then reposition it from the menu.

Q: How can I ensure the bridge connects correctly?

Make sure to slightly overlap the ends with the terrain to prevent any gaps.

Q: Where should I deliver the construction materials?

Deliver them to either end of the bridge at the marked construction zones.

以上がRoadcraftに橋を建設(shè)する方法の詳細(xì)內(nèi)容です。詳細(xì)については、PHP 中國語 Web サイトの他の関連記事を參照してください。