How to insert a memory card into a desktop computer

1. Use a screwdriver to open the chassis cover of the desktop host. The red circle on the way is the memory stick. Memory is the bridge in the computer and is responsible for data exchange between the processor and hardware such as hard disk, motherboard, and graphics card. The red circle on the way is the memory stick, next to the CPU fan and plugged into the memory stick.

2. Correct insertion method and direction of desktop computer memory module: Open the fixed locks on both sides of the slot so that the memory can slide in (pay attention to the fool-proof interface). Insert the memory slot vertically and use a little force on both sides (do not use force). When you hear two crisp clicking sounds, it means it has been inserted correctly. You can see that the lock bites the mouth of the memory.

3. Turn off the computer and unplug the power plug to ensure that the computer is powered off. Open the computer case. There is usually a side or rear cover that can be unscrewed appropriately using a screwdriver or other tool. Investigate the memory slots on the motherboard. They are usually long slots located near the center of the motherboard or close to the CPU.

4. Start the computer and enter the desktop. Insert the phone memory card into the card reader. Remove the clear cover of the card reader. Plug the card reader's Universal Serial Bus connector into your computer's Universal Serial Bus interface.

5. Operation method: If the computer has a memory card slot, insert the memory card directly to use; if the computer does not have a memory card slot, you can purchase a card reader and put the memory card into the card reader. , then insert the card reader into the USB interface of the computer and it can be used.

How to add a memory module to the computer

1. First, add a memory module. Buy a memory module that matches your computer, and then find someone to install it. Second, increase the computer’s virtual memory. Right-click and click Properties, then click "Advanced System Settings."

2. The method of adding a memory module to the computer is as follows: first open the computer casing and disassemble the computer. When installing memory, first open the buckles at both ends of the memory slot with your hands.

3. Generally, computer motherboards have at least two memory slots. If you only use one and there are free slots, you can keep the original memory stick and just insert the new memory stick into the free slot. Just slot it.

4. How to increase computer memory. Method 2: To increase the computer's virtual memory, first select the computer, then right-click and click Properties, and then click "Advanced System Settings".

5. Before inserting a new memory module, you must first determine whether the computer's operating system is 32 or 64-bit. If it is 32-bit, there is no need to expand the memory if it is added to 4G.

6. The collective operation is as follows: Press "Win R" on the desktop to open the run window. Enter "dxdiag" and click "OK". You can see the computer memory in the pop-up page. Use relevant software to check the original notebook memory model. Different models of notebook memory cannot be mixed.

How to insert the positive memory stick

Insert the memory stick: First determine the front and back sides. There is a small opening (notch) on the memory stick. Just line up this little opening with the bump on the memory module socket. After the small opening is aligned with the protrusion, the memory module can be inserted.

Align the notch with the protrusion on the motherboard memory socket and insert it. In order to prevent users from confusing the front and back. So the socket of the current memory module is asymmetrical. It may appear to the left or to the right.

When installing the memory module, you need to align it with the gap in the slot and insert it to the end.

Where to insert the computer memory module

1. Use a screwdriver to open the cover of the desktop computer. The red circle on the way is the memory module. The red circle on the way is the memory stick, which is next to the CPU fan and plugged into the memory stick. Look, a computer memory stick looks like this.

2. The memory module of a desktop computer is generally installed on the motherboard, next to the CPU socket of the motherboard. Small boards generally have two memory slots, which can accommodate two memory modules. Medium and large boards generally have four memory slots, which can accommodate four memory modules. The memory stick is a computer component that the CPU can address through the bus and perform read and write operations.

3. Computer memory modules are generally installed in the memory slot of the computer motherboard. The location is: Usage Tips: If the memory exceeds 4G, it is generally necessary to change to a 64-bit system. The 32-bit system supports a maximum use of 4G memory. If the memory exceeds 4G, it will be wasted.

The above is the detailed content of How to insert memory stick into computer. For more information, please follow other related articles on the PHP Chinese website!