Array parameter application method of Golang function
May 16, 2023 am 11:31 AM
Array parameter application method of Golang function
Golang is an open source programming language that is easy to learn, efficient and safe, and has garbage collection features. Arrays are a very basic data type in Golang. Arrays are also a common way to write programs as function parameters. This article will introduce the application method of arrays as function parameters in Golang, hoping to inspire readers in the application of Golang functions.
- Array is passed as a value parameter
When an array is passed as a function value, the formal parameter of the function will get a copy equal to the actual parameter value. Modifications to formal parameters do not affect actual parameters. This method is suitable for situations where you need to perform some simple operations on arrays in a function.
For example, the following code:
package main
import "fmt"
func modifyArr(arr [3]int) {
for i := 0; i < len(arr); i++ {
arr[i] += i
}
}
func main() {
var arr [3]int = [3]int{1, 2, 3}
fmt.Printf("Before modified, arr = %v
", arr)
modifyArr(arr)
fmt.Printf("After modified, arr = %v
", arr)
}The output result is as follows:
Before modified, arr = [1 2 3] After modified, arr = [1 2 3]
It can be found that even if the array is modified in the modifyArr function, the array is printed in the main function value, the value of the array has not changed.
- Array is used as a pointer to pass parameters
When the array is used as a pointer to a function to pass parameters, the function can directly modify the actual parameter group. This method is suitable for situations where Situations where more complex operations are performed in functions.
The following is a code example:
package main
import "fmt"
func modifyArrByPointer(arr *[3]int) {
for i := 0; i < len(arr); i++ {
arr[i] += i
}
}
func main() {
var arr [3]int = [3]int{1, 2, 3}
fmt.Printf("Before modified, arr = %v
", arr)
modifyArrByPointer(&arr)
fmt.Printf("After modified, arr = %v
", arr)
}The output results are as follows:
Before modified, arr = [1 2 3] After modified, arr = [1 3 5]
As you can see, in the modifyArrByPointer function, we modify the array through pointer operations.
- Array is passed as a slice parameter
When passing an array as a slice parameter of a function, all slicing operations of the array can be used inside the function. The advantage of this method is that it will not Copies the entire array, instead passing only the reference. This method is suitable for scenarios where slicing is required to operate on arrays.
For example, the following code:
package main
import "fmt"
func modifyArrBySlice(arr []int) {
for i := 0; i < len(arr); i++ {
arr[i] += i
}
}
func main() {
var arr [3]int = [3]int{1, 2, 3}
fmt.Printf("Before modified, arr = %v
", arr)
modifyArrBySlice(arr[:])
fmt.Printf("After modified, arr = %v
", arr)
}The output result is as follows:
Before modified, arr = [1 2 3] After modified, arr = [1 3 5]
As you can see, in the parameters of the modifyArrBySlice function, we use arr[:] to pass the array Slicing, in this way, the array can be sliced.
- Array fields in the structure are used as parameters
In Golang, the structure can also contain fields of array type. When passing a structure in a function, you can choose to pass a reference or value of the structure to operate on the array.
For example, the following code:
package main
import "fmt"
type ArrStruct struct {
arr [3]int
}
func modifyArrByStruct(s ArrStruct) {
for i := 0; i < len(s.arr); i++ {
s.arr[i] += i
}
}
func modifyArrByStructPointer(s *ArrStruct) {
for i := 0; i < len(s.arr); i++ {
s.arr[i] += i
}
}
func main() {
var s ArrStruct = ArrStruct{[3]int{1, 2, 3}}
fmt.Printf("Before modified, arr = %v
", s.arr)
modifyArrByStruct(s)
fmt.Printf("After modified by value, arr = %v
", s.arr)
modifyArrByStructPointer(&s)
fmt.Printf("After modified by pointer, arr = %v
", s.arr)
}The output result is as follows:
Before modified, arr = [1 2 3] After modified by value, arr = [1 2 3] After modified by pointer, arr = [1 3 5]
As you can see, when we pass the structure as the value of the function, the function cannot be modified. The value of its member variables, but when the structure is passed as a pointer to a function, its member variables can be modified.
Summary:
In Golang, there are three ways to use arrays as parameters of functions: value passing, pointer passing and slice passing. Value passing is suitable for simple operation scenarios, pointer passing is suitable for scenarios that require complex operations inside functions, and slice passing is suitable for scenarios that require slicing operations on arrays. In addition, in the structure, if the array is a member variable of the structure, you can choose to use the pointer of the structure to pass parameters for modification. In actual applications, developers should choose the appropriate parameter transfer method according to specific needs.
The above is the detailed content of Array parameter application method of Golang function. For more information, please follow other related articles on the PHP Chinese website!
Hot AI Tools
Undress AI Tool
Undress images for free
Undresser.AI Undress
AI-powered app for creating realistic nude photos
AI Clothes Remover
Online AI tool for removing clothes from photos.
Clothoff.io
AI clothes remover
Video Face Swap
Swap faces in any video effortlessly with our completely free AI face swap tool!
Hot Article
Hot Tools
Notepad++7.3.1
Easy-to-use and free code editor
SublimeText3 Chinese version
Chinese version, very easy to use
Zend Studio 13.0.1
Powerful PHP integrated development environment
Dreamweaver CS6
Visual web development tools
SublimeText3 Mac version
God-level code editing software (SublimeText3)
Hot Topics
What are the implications of Go's static linking by default?
Jun 19, 2025 am 01:08 AM
Go compiles the program into a standalone binary by default, the main reason is static linking. 1. Simpler deployment: no additional installation of dependency libraries, can be run directly across Linux distributions; 2. Larger binary size: Including all dependencies causes file size to increase, but can be optimized through building flags or compression tools; 3. Higher predictability and security: avoid risks brought about by changes in external library versions and enhance stability; 4. Limited operation flexibility: cannot hot update of shared libraries, and recompile and deployment are required to fix dependency vulnerabilities. These features make Go suitable for CLI tools, microservices and other scenarios, but trade-offs are needed in environments where storage is restricted or relies on centralized management.
How do I create a buffered channel in Go? (e.g., make(chan int, 10))
Jun 20, 2025 am 01:07 AM
To create a buffer channel in Go, just specify the capacity parameters in the make function. The buffer channel allows the sending operation to temporarily store data when there is no receiver, as long as the specified capacity is not exceeded. For example, ch:=make(chanint,10) creates a buffer channel that can store up to 10 integer values; unlike unbuffered channels, data will not be blocked immediately when sending, but the data will be temporarily stored in the buffer until it is taken away by the receiver; when using it, please note: 1. The capacity setting should be reasonable to avoid memory waste or frequent blocking; 2. The buffer needs to prevent memory problems from being accumulated indefinitely in the buffer; 3. The signal can be passed by the chanstruct{} type to save resources; common scenarios include controlling the number of concurrency, producer-consumer models and differentiation
How does Go ensure memory safety without manual memory management like in C?
Jun 19, 2025 am 01:11 AM
Goensuresmemorysafetywithoutmanualmanagementthroughautomaticgarbagecollection,nopointerarithmetic,safeconcurrency,andruntimechecks.First,Go’sgarbagecollectorautomaticallyreclaimsunusedmemory,preventingleaksanddanglingpointers.Second,itdisallowspointe
How can you use Go for system programming tasks?
Jun 19, 2025 am 01:10 AM
Go is ideal for system programming because it combines the performance of compiled languages ??such as C with the ease of use and security of modern languages. 1. In terms of file and directory operations, Go's os package supports creation, deletion, renaming and checking whether files and directories exist. Use os.ReadFile to read the entire file in one line of code, which is suitable for writing backup scripts or log processing tools; 2. In terms of process management, the exec.Command function of the os/exec package can execute external commands, capture output, set environment variables, redirect input and output flows, and control process life cycles, which are suitable for automation tools and deployment scripts; 3. In terms of network and concurrency, the net package supports TCP/UDP programming, DNS query and original sets.
How do I call a method on a struct instance in Go?
Jun 24, 2025 pm 03:17 PM
In Go language, calling a structure method requires first defining the structure and the method that binds the receiver, and accessing it using a point number. After defining the structure Rectangle, the method can be declared through the value receiver or the pointer receiver; 1. Use the value receiver such as func(rRectangle)Area()int and directly call it through rect.Area(); 2. If you need to modify the structure, use the pointer receiver such as func(r*Rectangle)SetWidth(...), and Go will automatically handle the conversion of pointers and values; 3. When embedding the structure, the method of embedded structure will be improved, and it can be called directly through the outer structure; 4. Go does not need to force use getter/setter,
What are interfaces in Go, and how do I define them?
Jun 22, 2025 pm 03:41 PM
In Go, an interface is a type that defines behavior without specifying implementation. An interface consists of method signatures, and any type that implements these methods automatically satisfy the interface. For example, if you define a Speaker interface that contains the Speak() method, all types that implement the method can be considered Speaker. Interfaces are suitable for writing common functions, abstract implementation details, and using mock objects in testing. Defining an interface uses the interface keyword and lists method signatures, without explicitly declaring the type to implement the interface. Common use cases include logs, formatting, abstractions of different databases or services, and notification systems. For example, both Dog and Robot types can implement Speak methods and pass them to the same Anno
How do I use string functions from the strings package in Go? (e.g., len(), strings.Contains(), strings.Index(), strings.ReplaceAll())
Jun 20, 2025 am 01:06 AM
In Go language, string operations are mainly implemented through strings package and built-in functions. 1.strings.Contains() is used to determine whether a string contains a substring and returns a Boolean value; 2.strings.Index() can find the location where the substring appears for the first time, and if it does not exist, it returns -1; 3.strings.ReplaceAll() can replace all matching substrings, and can also control the number of replacements through strings.Replace(); 4.len() function is used to obtain the length of the bytes of the string, but when processing Unicode, you need to pay attention to the difference between characters and bytes. These functions are often used in scenarios such as data filtering, text parsing, and string processing.
How do I use the io package to work with input and output streams in Go?
Jun 20, 2025 am 11:25 AM
TheGoiopackageprovidesinterfaceslikeReaderandWritertohandleI/Ooperationsuniformlyacrosssources.1.io.Reader'sReadmethodenablesreadingfromvarioussourcessuchasfilesorHTTPresponses.2.io.Writer'sWritemethodfacilitateswritingtodestinationslikestandardoutpu
