There are three ways to enter Windows 10 safe mode, as follows: 1. When you can enter the desktop normally, use "Settings" → "Update and Security" → "Recover" → "Advanced Boot" → "Restart Now" → "Troubleshooting" → "Start Repair" or "Start Settings" → Press the numeric keys (such as 4 or F4) to enter after restarting; 2. If the settings cannot be opened but the Start Menu or Task Manager can be operated, press the Shift key and click the "Restart" of the "Power" button. The next steps are the same as the first method; 3. When the system cannot start at all, you can force shut down three times. After the fourth normal power-on, the system will automatically enter the recovery environment, and then select "Troubleshooting" → "Start Repair" or "Start Settings" to enter the safe mode. If you still cannot enter, you should check whether the Fast Boot is turned off, whether the keyboard is normal, the dual system boot sequence and try "last correct configuration".

It is actually not difficult to enter the safe mode of Windows 10. The key is to choose the appropriate method based on the current system status. The following are several common and practical methods that are suitable for use in different scenarios.

Restart into safe mode via "Settings"

If you can still access the desktop normally, this is the most recommended way. The operation process is simple and not prone to errors:

• Open Settings → "Update and Security" → "Recover"
• Click "Restart now" in the "Advanced Start" section
• After restarting, select "Troubleshooting" → "Advanced Options" → "Start Repair" or directly select "Start Settings"
• After restarting again, press the numeric keys (usually 4 or F4) to enter safe mode

The advantage of this method is that the system will automatically guide you through the steps and will not be easy to operate incorrectly.

Restart with Shift to force into the recovery environment

If you cannot open the settings, but you can also click the Start menu or Task Manager, you can try this method:

• Click the "Start" menu → "Power" button
• Hold down the Shift key and click "Restart"
• The system will enter the recovery interface. The following steps are the same as above. Select "Startup Settings" → Restart → Press the numeric keys to enter safe mode

This method is suitable for situations where the system is stuck but can still operate in basic ways.

Forced shutdown method (applicable to black screen or crash)

When the computer cannot enter the system at all, it can only see the startup screen and get stuck. You can try this "hard core" method:

• Press and hold the power button for 10 seconds to force shut down, repeat 3 times
• When the fourth time is turned on normally, the system will recognize an exception and automatically enter the recovery environment.
• Next, select "Troubleshooting" → "Start Repair" or "Start Settings" to enter safe mode

Although this move is a bit "violent", it is very effective in some cases, especially when the system crashes or driver conflicts cause it to fail to start normally.

Can't get into the safe mode? Check these places

Sometimes, even if the operation is correct, you may not be able to enter safe mode. You can check the following common questions:

• Is Fast Boot enabled in BIOS/UEFI settings? If so, it is recommended to try it after closing it.
• Is there any problem with the keyboard, especially the connection between the laptop's own keyboard or external keyboard
• If you are using a dual system (such as Linux), you may need to manually adjust the startup sequence
• There is a problem after updating or installing the driver, try "Last correct configuration"

These small details are often overlooked, but they are likely to be the problem.

Basically, these common methods are all used, and different situations can be handled in different ways. The key is to first determine whether you can enter the system, and then choose the corresponding path, which is not complicated but is easy to ignore details.

The above is the detailed content of How to boot in Safe Mode Windows 10. For more information, please follow other related articles on the PHP Chinese website!