To connect a Bluetooth device to Windows 11, first make sure that the computer supports Bluetooth and is turned on, and the device is in pairing state; 1. Go to "Settings> Bluetooth and Other Devices" to turn on the Bluetooth switch and search for the device; 2. Click "Add Device" to select Bluetooth to ensure that the target device is turned on and enters pairing mode; 3. Complete the pairing according to the prompts, you may need to enter a PIN code or confirm the pairing code; if the pairing fails, check the device's connection status, distance, interference or update the driver; 4. After successful connection, you can adjust the audio output and other settings. If you need to unconnect, you can delete the device.

Even Bluetooth devices are actually quite straightforward on Windows 11. As long as the steps are correct, there will basically be no problems. The key is to make sure your computer supports Bluetooth, the system is running normally, and the device is in a pairable state.

Turn on Bluetooth and ready to connect

First, you have to make sure that the Bluetooth function on your computer is turned on. Some laptops come with Bluetooth modules, and desktop computers may need to plug in a Bluetooth adapter.
Go to Settings > Bluetooth and other devices and turn on the Bluetooth switch. At this time, the system will start searching for nearby Bluetooth devices.
If you don't see this option, the driver may not be installed or the hardware does not support it. You can first check whether there is an exclamation mark in the Bluetooth part in the device manager.

The right way to add a new device

Windows 11 provides two ways to add Bluetooth devices: one through the Settings menu and the other through the Quick Settings panel.
It is recommended to use the settings menu to operate, which is more intuitive:

• Open Settings > Bluetooth and Other Devices
• Click "Add Device"
• Select "Bluetooth"
• At this time, the system will list nearby devices that are being broadcasted.

Remember to turn on the device you want to connect to in advance and enter pairing mode (usually press and hold the power button for a few seconds or have a dedicated pairing button). Different headphones, speakers, and keyboards enter the pairing mode differently, and there are generally instructions on the manual.

Frequently Asked Questions during Pairing

Sometimes after clicking the device name, there will be several different pairing situations:

• Automatic pairing : The device is connected successfully directly
• Enter PIN code : For example, enter 0000 or 1234
• Confirm the pairing code : whether the numbers displayed on both sides are consistent

If the pairing fails all the time, the following reasons may be:

• The device has been connected to another computer
• Too far or signal interference
• Computer Bluetooth driver is old
• Some devices need to "ignore this device" before trying again

If you encounter problems, you can try restarting the Bluetooth service or update the Bluetooth driver.

Setting suggestions after successful connection

After the connection is complete, you can click on the device name to view detailed information, such as changing the sound output device, setting the default printer, etc.
For headphone devices, you can also select high-quality audio encoding in the sound settings (if supported) to improve the listening experience.
If you don't want to use it in the future, you can "delete the device" here.

Basically all of this is it. The uncomplexing but easy to ignore is the way the device enters the pairing mode and the driving state. If you understand these two points, most Bluetooth devices can be connected smoothly.

The above is the detailed content of How to connect Bluetooth devices on Windows 11?. For more information, please follow other related articles on the PHP Chinese website!