To get the best performance from the AG275UXM monitor, ensure GPU and cable compatibility, optimize in-game settings, fine-tune monitor settings, and keep drivers and firmware updated. 1) Use at least an RTX 3060 or similar AMD GPU with a certified DisplayPort 1.4 cable for full 240Hz QHD support. 2) Adjust in-game settings like resolution scaling, texture filtering, and shadow quality to maintain high FPS, especially in competitive titles. 3) Set monitor color mode to “Standard” or “sRGB,” enable G-SYNC, set response time to “Fast” or “Extreme,” and toggle input lag on for gaming. 4) Regularly update GPU drivers and monitor firmware to fix bugs and improve performance, particularly if experiencing flickering or color issues.

To get the best performance from your AG275UXM monitor, you need to match its capabilities with your PC’s hardware and settings. This monitor supports a 240Hz refresh rate, G-SYNC, and QHD resolution — so if your setup isn’t optimized, you won’t be using it to full potential.

Check Your GPU and Cable Compatibility

This monitor demands a decent GPU to push 2560x1440 at high frame rates. If you're running anything below an RTX 3060 or comparable AMD card, you might struggle to hit consistent high frame rates, especially in modern games.

Also, make sure you’re using the right cable. The AG275UXM supports DisplayPort 1.4 and HDMI 2.1. For full 240Hz at QHD, DisplayPort 1.4 is your best bet — HDMI 2.1 technically supports it too, but some GPUs or driver versions may not handle it perfectly yet.

• Use a certified DP 1.4 cable
• Avoid older HDMI cables or adapters that don’t support high bandwidth
• Double-check your GPU's output specs

Optimize In-Game Settings

Just because your monitor can run at QHD (2560x1440) doesn’t mean you always have to. If you’re seeing dips below 144 FPS in more demanding titles, consider tweaking resolution scaling or lowering certain visual effects like shadows or ambient occlusion.

For competitive games like CS:GO or Valorant, prioritize high FPS over ultra settings. Turn off unnecessary post-processing and set textures to high or medium depending on your system’s VRAM.

Some general tips:

• Set texture filtering to "bilinear" or "trilinear" instead of anisotropic if you need a small boost
• Lower shadow quality — it's one of the most performance-heavy settings
• Enable "high" or "ultra" only for effects you can actually notice

Fine-Tune Monitor Settings

The default preset on the AG275UXM tends to oversaturate colors a bit. Go into the monitor’s OSD menu and switch to “Standard” or “sRGB” mode for accurate color reproduction. If you do photo or video editing, calibrate the display using a tool like Datacolor Spyder or X-Rite i1Display.

Response time should be set to "Fast" or "Extreme" to reduce ghosting, and input lag should be toggled on when gaming. Don’t forget to enable G-SYNC if your GPU supports it — this helps eliminate screen tearing without the latency issues of V-Sync.

A few key settings to double-check:

• Input Lag: On (for gaming), Off (for media/editing)
• Overdrive: Fast/Extreme, but watch for inverse ghosting
• Color Mode: Standard or calibrated profile
• HDR: Only enable if you’re viewing HDR content — SDR looks better with HDR off in many cases

Keep Drivers and Firmware Updated

Your graphics drivers play a big role in how well your monitor performs. NVIDIA and AMD regularly release updates that improve performance in new titles and fix compatibility bugs. Similarly, check Acer’s website for firmware updates for the AG275UXM — sometimes they roll out improvements for color accuracy or panel responsiveness.

If you're noticing flickering, stuttering, or weird color shifts, updating both GPU drivers and monitor firmware is a good first step before troubleshooting hardware.

That’s basically all you need to make the most of the AG275UXM. It’s a solid monitor, but like any high-end gear, it needs the right setup and tuning to shine.

The above is the detailed content of How do I ensure I'm getting the best performance from the AG275UXM with my PC?. For more information, please follow other related articles on the PHP Chinese website!