Perhaps you're searching for details about DOCP; if so, this article is exactly what you need. This post from MiniTool explains what DOCP is and provides instructions on how to activate and deactivate it. Additionally, you'll learn how to address DOCP-related problems.

What Is DOCP?

What exactly is DOCP? DOCP refers to Direct Overclocking Profile. It is an overclocking profile created by ASUS specifically for AMD motherboards. DOCP employs the XMP protocol to automatically configure data rate and timing on AMD motherboards.

For more information, refer to: What Is XMP Profile and How to Enable It to Boost RAM Performance

DOCP is far superior to manual configuration as you might make errors when adjusting voltage and speed. However, DOCP sets everything according to the hardware specifications.

DOCP enhances speed and voltage for improved stability and also influences the CPU's memory controller. It is common to notice a rise in temperature while gaming. Occasionally, inadequate ventilation could be the primary cause of the temperature increase after enabling DOCP. Ensure your CPU case has sufficient fans and verify that your CPU cooler is adequate.

How to Enable/Disable DOCP

Now, let's explore how to enable or disable DOCP.

Step 1: Press the F2 or Delete key during the startup process to access BIOS.

Step 2: Press the F7 key to open the Advanced mode. Then, select the AI Tweaker option.

Step 3: Click the dropdown arrow beside AI Overclock Tuner.

Step 4: Choose D.O.C.P from the menu. Finally, click Save & Exit or press the F10 key.

After enabling DOCP, you can also configure FCLK (Fabric Clock). It should be set to half the MHz value of DDR4 RAM.

To disable it, follow the initial three steps outlined earlier and opt to stop using DOCP either automatically or manually.

How to Resolve DOCP Issues

Occasionally, DOCP can lead to game crashes. If you experience this issue, consider the following solutions to resolve it.

1. Inspect Your Memory

QVL (Qualified Vendor List) is supplied by the motherboard manufacturer, allowing you to check hardware compatibility. If your RAM isn't on the list, you must acquire compatible RAM.

2. Raise Memory Voltage

Increasing the RAM voltage and manually setting the timing might resolve the crash issue, so ensure you attempt this before purchasing new RAM.

3. Reset CMOS

If your PC fails to boot after enabling DOCP, try resetting CMOS (Complementary Metal Oxide Semiconductor). Resetting CMOS restores your BIOS to its factory default settings. CMOS can be reset via BIOS, but since your PC is off, you can reset it through CLRTC.

Final Thoughts

This post has covered details about DOCP. You can learn how to enable DOCP and disable it. Moreover, you can discover ways to fix DOCP issues. Therefore, when you face similar errors, remain calm, apply the methods discussed here, and you should be able to resolve them.

The above is the detailed content of What Is DOCP? How to Enable/Disable It on Your Computer?. For more information, please follow other related articles on the PHP Chinese website!