Have you ever encountered an error message that says "Restart and select the correct boot device"? This is a common problem on Windows 10 and 11 and can be frustrating to solve. Fortunately, there are some useful troubleshooting tips that can help you restart your computer. Let's see how to solve this problem.

The "Reboot and select the correct boot device" error is a common problem on Windows computers. This error occurs when your computer tries to boot from the wrong device or drive, causing the system to fail to boot properly.

In this blog post, we will guide you through the “Restart and select the correct boot device” error and get your computer to restart and run.

What causes a restart and select the correct boot device error?

Just like other Windows 10 and Windows 11 issues, there are several possible sources of this error. You may encounter it for one of the following reasons:

• Your system boot sequence is not configured correctly.
• Traditional mode is enabled or disabled.
• An HDD failure occurred.
• The system partition has been deactivated.
• There is a problem with the Windows registry.

If you encounter the above problem, it takes some patience and technical knowledge to resolve the “restart and select the correct boot device” error. Let's take a look at how to solve this problem step by step.

How to fix restart and select the correct boot device error

Fortunately, there are several ways you can use to fix the “Restart and select the correct boot device” error. Depending on your system settings, one of the following methods should help you solve this problem:

1. Check and adjust the startup sequence

The first thing to do is check the startup order in the BIOS. You just need to make sure your computer boots up correctly lists your hard drive as the first option. The following are the specific steps:

1. Restart your computer.

2. Before the system starts, enter the BIOS menu by pressing the key displayed on the first screen. It may be one of these keys: Esc , Del , F2 , F8 , F10 or F12 . If you see multiple keys listed, use the keys assigned to the BIOS, Settings, or BIOS menu.

   

3. Using the arrow keys on the keyboard, navigate to the Startup tab. Here, make sure that the HDD or SSD with Windows installed is the first in the list.

   

4. After moving the system disk to the first position in the startup sequence, save the settings and restart your computer again.

You should immediately see if this resolves the "Restart and select the correct boot device" error. If the problem persists, please proceed to the next method!

2. Check for hard disk failures

To find out if your hard drive is faulty or damaged, use the automatic repair tool in Easy Recovery Essentials. The application will report any issues with your hard drive and RAM memory for you to fix.

1. Download the Easy Recovery Essentials application.

2. You have two options to create recovery media. You need to burn a bootable ISO image or create a recovery USB boot device.

3. Restart your computer and boot from the media containing Easy Recovery Essentials.

4. Select the automatic repair tool. Click the Continue button and wait for the process to complete processing of your system. Once done, you will see a report of any issues with your hard drive.

   

After running this tool and verifying the status of your HDD or SSD, you can evaluate the situation and decide whether you need to replace the hardware.

3. Disable legacy boot (UEFI)

If your computer is running on UEFI instead of BIOS and you're constantly experiencing a "restart and select the right boot device" error, disabling traditional boot mode may solve your problem.

1. Restart your computer.

2. Before the system starts, enter the UEFI menu by pressing the key displayed on the first screen. It may be one of these keys: Del , F2 , F8 or F12 .

3. Browse your menu to find the traditional startup options. Usually, you will find it in Security > Traditional Support .

   

4. Use the on-screen controls to make sure traditional mode is disabled . After closing it, save the settings and exit the UEFI menu.

5. Restart your computer and see if the error still appears on your device.

4. Use the Diskpart tool

If you get the "Restart and select the correct boot device" error, it is most likely that your primary partition is no longer active. Fortunately, you can use diskpart to solve this problem. As long as you set the partition to active again, everything should return to normal.

1. Insert your Windows installation disk and boot from that media. Navigate to Troubleshooting > Advanced Options > Command Prompt .

   

2. Enter " diskpart " without quotes and press Enter on the keyboard to execute the command. This will start the diskpart tool.

   

3. Continue to execute the select disk 0 command. Before pressing Enter, it is important that you replace "0" with the corresponding number of the disk with Windows installed.

4. Enter the following command:

   • list partition
   • select partition 1
   • Active

   

5. After performing the above steps, you can restart the system and see if the "Restart and select the correct boot device" error still appears.

5. Fix your registry

The registry file left by not installing the application can cause many problems on your PC, including the "Restart and select the correct boot device" error. If this is the case, cleaning your Windows registry may fix the issue.

Note : Before making any modifications to the registry, it is highly recommended to create a system restore point in case of any unexpected problems.

You can do this with free tools like CCleaner or Auslogics Registry Cleaner. You just need to install these applications from the official website and run a dedicated registry cleaning tool to organize everything.

in conclusion

Fixing the "Reboot and select the correct boot device" error on Windows 10 or 11 can be a frustrating experience. However, with the help of this guide, you should now know how to solve this problem quickly and effectively.

If you have any other questions about resolving this error, please feel free to contact our SoftwareKeep support team. Good luck!

One more thing

We're so glad you read this article :) Thank you for reading.

If you have time, please share this article on your social media; others may benefit as well.

Subscribe to our newsletter and be the first to read our future articles, comments and blog posts from your mailbox. We also provide offers, promotions and updates to our products via email. You won't miss one.

Related Articles

? How to change the startup order of your computer ? How to fix the inaccessible boot device error in Windows 10 ? Solution to boot device not found on Windows 10

The above is the detailed content of Reboot and Select Proper Boot Device Error Fixed. For more information, please follow other related articles on the PHP Chinese website!